Experts help solve three problems of flooring in s

2022-07-22
  • Detail

The weather in summer is always unpredictable and unpredictable. For such excessively dry and humid weather, the wooden floor at home will inevitably encounter some seasonal problems. Such as floor arching, discoloration, large shrinkage joints, etc. There are many reasons for these problems, which may be caused by the wet expansion and drying shrinkage of wood, or by improper installation or maintenance. Here are how to identify and solve the three major problems of summer flooring

find out the reason and apply the remedy to the case to solve the floor arching in summer

the floor arching is due to the expansion of the floor after being affected with moisture. For floor arching, the reason is likely to be that the floor is inadvertently blistered, or it may be that the expansion joints are not reserved enough during paving

first, the floor is soaked and affected with moisture

the main cause of arching is often that the floor is subject to a large area of blisters. In the following rainstorm, the window is not closed, the rain is washed in, and the water cup is splashed and soaked in the floor without timely treatment. After the floor is blistered, the floor volume increases, causing arching. This problem is often caused by people's improper handling, and the responsibility should be borne by the water leakage party

II. The wooden floor is laid too tightly

if the laying is in the dry season, the groove beat is too tight. When the environmental humidity increases, the floor expands with the increase of the environmental humidity. The floor is tightly assembled and cannot be stretched, but can only expand upward, causing arching. For this reason, the responsibility should be borne by the laying construction personnel

III. The moisture content of the floor is too low

in addition, there is another possibility that the moisture content of the wood floor is too low, and the wood floor is too dry, which will cause deformation and arching once it is affected by moisture and water absorption transition. For the products of large manufacturers or well-known manufacturers, it is rare to fail to meet the indicators. This responsibility shall be borne by the floor manufacturer

IV. there are ways to solve household floor arching

the main cause of arching is often that the floor is subject to a large area of blisters. In the following rainstorm, the window is not closed, the rain is washed in, and the water cup is splashed and soaked in the floor without timely treatment. After the floor is blistered, the floor volume increases, causing arching. This problem is often caused by people's improper handling, and the responsibility should be borne by the water leakage party

成都精神医院

昆明妇科医院

常州妇科医院

合肥精神医院

Copyright © 2011 JIN SHI